Recliners are often the most comfortable spot in the house, so when they start to lean to one side, it can be a bit of a bummer. Fortunately, fixing a recliner that leans to one side is often an easy and inexpensive task that anyone can do. It just takes a few tools, a bit of patience and a few steps.
Tools and Supplies Needed
- Pencil
- Measuring tape
- Phillips head screwdriver
- Adjustable wrench
- Replacement screws
Step 1: Inspect the Recliner
Start by inspecting the recliner to figure out why it is leaning. Look at the frame and look for any bent or broken parts. If there are any, you may need to replace them. You also want to check the screws and bolts to make sure they are all tight and secure.
Step 2: Tighten Loose Bolts and Screws
Once you have identified the loose bolts and screws, use the Phillips head screwdriver and adjustable wrench to tighten them. Make sure the screws and bolts are tight, but not too tight. If they are too tight, it can cause the recliner to lean even more.
Step 3: Measure the Recliner
Once you have tightened all the bolts and screws, use a measuring tape to measure the recliner. Measure from the floor to the top of the recliner, from side to side, and from front to back. This will help you determine if the recliner is still leaning or if it is level.
Step 4: Replace Broken Parts
If the recliner is still leaning after tightening the bolts and screws and measuring it, you may need to replace some parts. If there are any broken parts, use the measuring tape to measure the size of the part and then purchase the replacement part. Use the Phillips head screwdriver to remove the old part and then use the replacement screws to install the new part.
Step 5: Tighten the New Parts
Once you have replaced the broken parts, use the Phillips head screwdriver and adjustable wrench to tighten the new parts. Make sure the screws and bolts are tight, but not too tight. If they are too tight, it can cause the recliner to lean even more.
Step 6: Test the Recliner
Once you have finished tightening the new parts, sit in the recliner and test it out. Make sure it is level and comfortable. You may need to make some adjustments, such as adding or removing stuffing, to make it comfortable. Once you have the recliner adjusted to your liking, you should be all set.
Conclusion
Fixing a recliner that leans to one side is a relatively easy task that anyone can do. All you need is a few tools, a bit of patience, and a few steps. Start by inspecting the recliner, then tighten any loose bolts and screws. Measure the recliner, replace any broken parts, and then tighten the new parts. Finally, test the recliner and make any necessary adjustments.
People Also Ask
What Causes a Recliner to Lean to One Side?
A recliner can lean to one side due to loose bolts and screws, broken parts, or an uneven frame. Inspect the recliner to see if any parts are broken or loose, then make any necessary repairs or adjustments.
How Do You Level a Recliner?
To level a recliner, start by inspecting the recliner to see if any parts are broken or loose. Tighten any loose bolts and screws, measure the recliner, replace any broken parts, and then tighten the new parts. Finally, test the recliner and make any necessary adjustments.
How Do You Adjust a Recliner?
Adjusting a recliner can involve adding or removing stuffing, adjusting the tension of the springs, or adjusting the tension of the backrest. If the recliner is leaning to one side, inspect the recliner for any loose bolts and screws, broken parts, or an uneven frame. Make any necessary repairs or adjustments, then test the recliner and make any necessary adjustments.
How Do You Fix a Squeaky Recliner?
To fix a squeaky recliner, start by inspecting the recliner to see if any parts are broken or loose. If the recliner is still squeaky after tightening any loose bolts and screws, try applying some lubricant, such as WD-40, to the moving parts. If the squeaking persists, you may need to replace some parts.
How Do You Fix a Sticky Recliner?
To fix a sticky recliner, start by inspecting the recliner to see if any parts are broken or loose. If the recliner is still sticky after tightening any loose bolts and screws, try applying some lubricant, such as WD-40, to the moving parts. If the stickiness persists, you may need to replace some parts.
Fixing a recliner that leans to one side is an easy task that anyone can do. Start by inspecting the recliner, then tighten any loose bolts and screws. Measure the recliner, replace any broken parts, and then tighten the new parts. Finally, test the recliner and make any necessary adjustments.
How To Fix A Recliner That Leans To One Side – BestBudgetFor
How to Fix a Recliner that Leans to One Side Properly?
How to Fix a Leaning Recliner (Step by Step Guide)
